Search

[qvqc]

### Wownerod Quick Start

One liner for installing and joining the wownero solo miners alliance network, for fast/private/robust wownero block relay.

On a Ubuntu or Debian distro, run (takes about 5min to complete):

`wget https://git.wownero.com/qvqc/wow-sman/raw/branch/master/wow-sman.sh -O - | sh`

### this installs

* wownderod service with alliance network peers
* i2pd/tor integration for transaction relay and RPC services
* xmrig/xmrig-proxy in /usr/local/bin path ready to config

[h0dl3r]

How would the configuration be with several miners simultaneously? does each point to its own proxy or can a single node be used as a proxy and the rest pointing to that device? Could you give an example of the configuration to introduce in the proxy after running these scripts?

[qvqc]

* run this script on multiple machines
* pick one machine to run wownerod and xmrig proxy
* on other machines run `systemctl stop wownerod` and `systemctl disable wownerod`
* follow the guide by @jrswab , How To Mine Wownero With Xmrig Proxy

**Bonus:**  add service files for xmrig and xmrig-proxy so they autostart on reboot

[h0dl3r]

for the moment I prefer to continue using only xmrig and wownerod, until I fully understand how to configure the proxy. Thank you anyway.

[qvqc]

(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)

[MesMersie]

is there i way i can join this solo miners alliance network through windows? i use a windows machine for wownerod

[qvqc]

probably? dont have a windows machine to test on so cant give exact steps.  you will need a tor/i2p hidden service pointed at the wownerod rpc and p2p ports.  if you figure it out please share!  

you could try to combine these guides:

https://miloserdov.org/?p=1839
https://web.getmonero.org/resources/user-guides/node-i2p-zero.html
https://forum.wownero.com/t/how-to-setup-a-full-node-with-tor-i2p/588/1

[chz8494]

what's the benefit of doing this?

[qvqc]

this automates some steps and might save on setup time if you want to connect to other wownero miners over privacy networks..

> * installs wownderod service with alliance network peers
>* installs i2pd/tor integration for P2P and RPC services
>* installs xmrig/xmrig-proxy in /usr/local/bin path ready to confi
> * **friends be jelly**
> * **node is available** regardless of home firewall
> * **help the network** with out revealing public ip
> * **be cheap**, no need to pay for VPS hosting

[h0dl3r]

hello, I'm running a new node since a few days, how do I manage the proxy and the miner? Thanks.

[qvqc]

follow this guide, create config files in the directory where you run xmrig
https://forum.wownero.com/t/how-to-mine-wownero-with-xmrig-proxy/672

[h0dl3r]

xmrig receives this message trying to use proxy running in the node with i2p, the configuration has been tested in a common node and works well.

[orklemerkle]

Check your network routes--try `ping `.

Or are you trying to get `xmrig` to connect over I2P to the proxy?

[h0dl3r]

Im checking again the proxy runing in the SMAN node, the test is inside the LAN in the same subnet 192.168.1.X(xmrig) - - - > 192.168.1.Y(SMAN+xmrig-proxy)

[qvqc]

might be the firewall, you can open the port on the machine running xmrig-proxy with
```
sudo ufw allow 3333
```

or you could disable the firewall with

```
sudo ufw reset
sudo ufw disable
```