One liner for installing and joining the wownero solo miners alliance network, for fast/private/robust wownero block relay.
On a Ubuntu or Debian distro, run (takes about 5min to complete):
wget https://git.wownero.com/qvqc/wow-sman/raw/branch/master/wow-sman.sh -O - | sh
How would the configuration be with several miners simultaneously? does each point to its own proxy or can a single node be used as a proxy and the rest pointing to that device? Could you give an example of the configuration to introduce in the proxy after running these scripts?
systemctl stop wownerod and systemctl disable wownerod
Bonus: add service files for xmrig and xmrig-proxy so they autostart on reboot
for the moment I prefer to continue using only xmrig and wownerod, until I fully understand how to configure the proxy. Thank you anyway.
is there i way i can join this solo miners alliance network through windows? i use a windows machine for wownerod
probably? dont have a windows machine to test on so cant give exact steps. you will need a tor/i2p hidden service pointed at the wownerod rpc and p2p ports. if you figure it out please share!
you could try to combine these guides:
what’s the benefit of doing this?
this automates some steps and might save on setup time if you want to connect to other wownero miners over privacy networks…
- installs wownderod service with alliance network peers
- installs i2pd/tor integration for P2P and RPC services
- installs xmrig/xmrig-proxy in /usr/local/bin path ready to confi
- friends be jelly
- node is available regardless of home firewall
- help the network with out revealing public ip
- be cheap, no need to pay for VPS hosting
hello, I’m running a new node since a few days, how do I manage the proxy and the miner? Thanks.
follow this guide, create config files in the directory where you run xmrig
xmrig receives this message trying to use proxy running in the node with i2p, the configuration has been tested in a common node and works well.
Check your network routes–try ping <proxy host>.
Or are you trying to get xmrig to connect over I2P to the proxy?
Im checking again the proxy runing in the SMAN node, the test is inside the LAN in the same subnet 192.168.1.X(xmrig) - - - > 192.168.1.Y(SMAN+xmrig-proxy)
might be the firewall, you can open the port on the machine running xmrig-proxy with
sudo ufw allow 3333
or you could disable the firewall with
sudo ufw reset
sudo ufw disable
I think that the lines “enabled”, “daemon-poll-interval” & “daemon” inside config.json to mine with proxy must been erased and “rig-id” specified with some value “x”, I was using this lines in the script mining without proxy only with xmrig and wownerod, from that comes the issue.